This post may contain affiliate links. Please view our affiliate policy and terms and conditions here. Please use common sense and follow all safety and manufacture instructions when using any crafting equipment in your own home. Use these at your own risk, Method-To-Madness does not assume any liability for injuries or damages caused by attempting the DIY crafts listed on our site nor are we responsible for any medical costs associated with injuries.
So after tackling my older son’s bedroom(this will eventually be linked to that post), I decided to go with the ocean theme for our little’s nursery. It was sentimental to both my husband and I and I had a lot of creative juices flowing over from my previous exposé. I went with a lot more simple ideas because well…I was growing a human inside my body and had no business being on a ladder. So instead, we purchased some cute but realistic wall stickers that my son helped me place. And we framed some pretty prints that we bought, I can no longer find the exact prints but here’s some really cute ones and here’s some frames similar to the ones we used. We also got some 3-D wall art, a sail boat for the shelf, and a beach themed wall hanger to add some texture to the room. My personal favorite was this mermaid and merbaby picture. It hangs over his changing table. It’ll be a keepsake when I’m old and gray.
My mom also found at a thrift store, two really cute framed prints that sort of had a “Rainbow Fish” vibe to them. But the room still felt incomplete. I had seen some DIY light up jelly fish lamps that could hang over the crib but I worried that as he grew he would likely climb up to reach them and could get hurt (I was right he was a climber!). Plus I wasn’t sure about having the lights on all the time in his room (an issue I faced with battery operated lights in my older son’s cloud lamp). So instead I opted to make a jellyfish of my own design, one that had no light source but sticks on the wall completely, with the tentacles secured up and out of the way. I happened to also have some seashell fabric that I was DYING to use and this was a perfect project for the texture it created.
I ultimately did this project after I had given birth, I do NOT recommend doing it while pregnant because you will need a ladder to get it up high enough.
So I gathered my materials and set to work.
- Textured tentacle material (seashell fabric)
- Second tentacle and body covering material (crushed sheer fabric)
- Solid material in your base color (satin fabric or shimmery fabric)
- Office Stapler
- Measuring Tape or Board
I included links to materials I thought would work well. However, all of my materials I found at the thrift store. If you’re interested, go in the linens section because you can find great fabric for cheap! Brand new fabric off the bolt is extremely overpriced in my opinion; plus what better way to find other uses for all those textiles that humans have been wearing and tossing for decades. Why not repurpose some things into decor you love!
I’d say ribbon would work best for the highly textured tentacles and seriously, drapes at a thrift store are like one of the best purchases you can make. I’ll post some more drape projects later
Once you’ve decided on colors and layering, start cutting. You’ll need roughly a 18×8 rectangle of solid fabric and 20×20 square of sheer fabric for the body. Don’t worry about the measurements or the cut being perfect, you won’t see the edges when you’re done. Staple the solid fabric loosely in a sort of oblong rounded shape (think how a jellyfish body looks). Don’t pull the fabric tight, you want slack so you can play around with the draping. Next, take the top of your sheer square and fold it under about 1/4 inch so the edge is rounded. Staple the fabric to the wall so that it surrounds the solid fabric in an overlay sort of fashion. Keep rolling the edge of the sheer fabric under as you work your way around the jellyfish body. Remember: dome like shape with soft, rounded edges. NOTE: Either leave the bottom open or leave larger spaces to get your hands through for adjusting the fabrics and for placing the tentacles! Once you have your outline done, begin draping and stapling the center of the body fabric to your liking. You’re going for a flowy under water look, so focus on creating soft rounded texture.
Next, cut your tentacles from your 2 (or more) fabrics/ribbons. I did roughly 18-24 inches long and 2-3 inches wide. I had a total of 9 tentacles. You want them longer because you will be folding and stapling sections to add movement and texture, therefore shortening your fabric. Please note how high your lowest tentacle is! You do not want your child to be able to reach the lowest tentacle, keep it at least 4-6 inches away from their grasp. Should they get ahold of it, they could pull the fabric and the staples would come out potentially causing a hazard to your child. Be cautious and aware!
Once you have your pieces, take them one at a time and tuck one end under the bottom of your jellyfish body, stapling it in place. Remember to fold the fabric of the jellyfish body so it keeps the rounded edge. I did my bottom of the jelly sort of wavy too to help blend and create a more natural look. Then work your way down the tentacle draping, curving, and shaping as you please to create movement. I also did mine with a slight angle so it appears that the jelly is moving. Continue this method until all the tentacles are in place and you are pleased with your end result!
Show me your jelly pictures!
Next DIY will be…
OMBRE LETTER PAINTING!